top of page

Load data for .300 AAC Blackout + .308 | 178gr | Hornady ELD-X

Recommended Powder(s): Accurate No. 11 FS, Hodgdon LilGun

.300 AAC Blackout + .308 | 178gr | Hornady ELD-X

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 178gr | Hornady ELD-X
Manufacturer SKU:
3074
Bullet Weight:
178gr | 11.5g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.404" | 35.7mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.545" | 13.8mm
Shank Seated Depth:
0.385" | 9.8mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B2692_C348
Last updated:
2025-02-02
Recommended Twist Rate:
1:11 - 1:9

Load data for 16 loads in caliber .300 AAC Blackout with .308 | 178gr | Hornady ELD-X bullet and 8 powders such as Accurate No. 11 FS, Hodgdon LilGun. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 10.7 fps

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 5744
<<locked>>
95%
48515
96%
**29
96%
Accurate No. 11 FS 👍
<<locked>>
96%
48805
96%
**29
99%
Hodgdon LilGun 👍
<<locked>>
92%
48182
95%
**75
100%
Lovex D060
<<locked>>
95%
45600
90%
**96
95%
Lovex D063
<<locked>>
94%
47993
95%
**16
96%
Lovex S040
<<locked>>
91%
49995
98%
**77
100%
Shooters World Blackout
<<locked>>
94%
47993
95%
**16
96%
Shooters World Buffalo Rifle
<<locked>>
95%
45600
90%
**96
95%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 5744
<<locked>>
91%
42496
84%
**63
95%
Accurate No. 11 FS
<<locked>>
91%
42656
84%
**67
98%
Hodgdon LilGun
<<locked>>
84%
36085
71%
**57
100%
Lovex D060
<<locked>>
93%
42496
84%
**63
95%
Lovex D063
<<locked>>
89%
41800
82%
**50
95%
Lovex S040
<<locked>>
89%
46586
92%
**44
100%
Shooters World Blackout
<<locked>>
89%
41800
82%
**50
95%
Shooters World Buffalo Rifle
<<locked>>
93%
42496
84%
**63
95%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page